Home > Projects > Microcontrollers > DC Motor Control using IR data communication

DC Motor Control using IR data communication

Thursday, November 6th, 2008

Current generation moves into wireless technology. Every one wishes to use remote controls. In this way, the speed of the DC motor is controlled by IR rays. IR rays get modulated with combination of data signal and carrier wave of 38 kHz. At the received end, the modulated signal is demodulated which is given to another controller, connected to the Dc motor driving circuit.

Block diagram of DC Motor Control using IR data communication

Block diagram of DC Motor Control using IR data communication

Algorithms:

Transmission
STEP1: Start
STEP2: Initialize the LCD
STEP3: Display speed on LCD
STEP4: Check for interrupt
STEP5: If INT0, increment counter and transmit.
STEP6: If INT1, decrement counter and transmit.
STEP7: Repeat STEP3.
STEP8: End

Reception

STEP1: Start
STEP2: Initialize the LCD
STEP3: Check for serial interrupt
STEP4: Display the received value
STEP5: If Caught compare R0 for 31,32,33,34.
STEP6: If R0 = 31 run motor in 25% speed
STEP7: If R0 = 32 run motor in 50% speed
STEP8: If R0 = 33 run motor in 75% speed
STEP9: If R0 = 34 switch OFF motor
STEP10:Go to STEP3.

Flowchart for Transmission:

Flowchart for Transmission

Flowchart for Transmission

Flowchart for Interrupt(INT0):

Flowchart for Interrupt(INT0)

Flowchart for Interrupt(INT0)

Flowchart for Interrupt(INT1):

Flowchart for Interrupt(INT1)

Flowchart for Interrupt(INT1)

Pages: 1 2 3

Avatar Image

Author Name :
Ranjith

Total : 32 Comments

Simillar Posts

32 Responses to DC Motor Control using IR data communication

  1. brinda
    February 5th, 2009 at 8:24 pm

    can u sent me or publish the ciruit diagrm for this project.

  2. sabri
    March 2nd, 2009 at 12:41 pm

    can u sent me or publish the ciruit diagrm for this project.

  3. swaroop kumar
    July 13th, 2009 at 10:44 pm

    how do i construct it for the submission of my project please tell me its very important plz help me out

  4. mohankumar
    July 20th, 2009 at 10:59 pm

    Respected Sir,
    I have seen all your projects. Every one is superb. But i need circuit for this DC MOTOR CONTROL USING IR RAYS. Kindly plz help me sir……….

  5. Vipul
    August 9th, 2009 at 2:37 pm

    Sir,
    Please send me the circuit diagrams if possible

  6. rohit
    September 6th, 2009 at 3:20 pm

    Sir,
    Please send me the circuit diagrams if possible

  7. roman
    September 21st, 2009 at 12:55 pm

    Please send me the circuit diagrams if possible

  8. neha
    October 23rd, 2009 at 11:24 am

    sir i m interested in your project , can u plz provide me the circuit diagram of this project and also the PCB layout .
    needed urgently as i want to make my project .
    thanks in advance ..

  9. Jody
    November 11th, 2009 at 8:37 pm

    Hello sir I like how your project is laid out and i would love to put it together. My i have the circuit diagram and parts list. Thank you for your help

  10. Rinku Garg
    March 11th, 2010 at 1:31 pm

    sir, i am a student of final year i wnt the ckt diag. of the dc motor controller using IR data

  11. ramani
    April 11th, 2010 at 11:00 pm

    hello sir.i am really interested in reading about this project further. i would like to know it’s working with a circuit diagram. i would be glad if you could help me with the circuit diagram.

    thankyou.

  12. vahdane
    April 19th, 2010 at 7:54 pm

    i m interested in your project , can u plz provide me the circuit diagram of this project and also the PCB layout .
    needed urgently as i want to make my final project .
    thanks for your help

  13. subodh
    April 23rd, 2010 at 3:44 pm

    sir, pls send me the detail ckt diagram , information.

  14. Jimi Falaiye
    June 11th, 2010 at 10:16 pm

    Sir, can i please have the circuit diagram and the pcb layout for this project.
    I need it for my final year project and would be grateful if i can get this along with any
    documentation that might be of help.
    Thanks

  15. sweta bajaj
    July 6th, 2010 at 1:14 am

    can u please help me with the circuit diagram
    thank u

  16. sneha
    August 9th, 2010 at 4:48 pm

    can we write the code in c++ and send to microcontroller.Plz reply
    very early.

  17. saranya bhavsingh
    September 2nd, 2010 at 9:21 pm

    i want device drivers program for speed control of dc motor trough
    blue tooth in pc please send very impotent for me 09014696131
    mail id bhavsingh_pm007@yahoo.co.in

  18. rahul kumbhat
    November 30th, 2010 at 1:22 pm

    hello. coincidentallyy this is the very same project that me and my partner have been alloted in our syllabus. we have to make a stepper motor work using an infrared remote conteol device. i would be very grateful if u cud mail me the relevant circuit diagrams and also the approximate cost of building the project (components, wires, solder iron etc.)
    hope u do the needful at the earliest possible.
    thanks
    rahul kumbhat

  19. Zubin Gandhi
    December 17th, 2010 at 11:56 am

    SIR…..
    I WANT THE CIRCUIT COMPONENTS DETAILS AND CIRCUIT DIAGRAM CAN U SIR PL.
    HELP ME

  20. monica
    February 3rd, 2011 at 4:13 pm

    can u plz mail me circuit diagrams and components………..

  21. avinash
    February 8th, 2011 at 6:33 pm

    plz can u send me acircuit diagram for this we have mini project we
    wanted to do this project it is good

  22. ankit
    February 11th, 2011 at 7:18 pm

    plz send me a details with ckt dig…

  23. tanvi
    April 20th, 2011 at 7:14 pm

    please sir can u send me the circiut of the receiver and transmitter please!

  24. priyanka
    August 9th, 2011 at 6:46 pm

    pls send me the circuit daigram if possible

  25. NEHA
    September 4th, 2011 at 6:41 pm

    PLZ SEND THE CIRCUIT DIAGRAM OF DIS PROJECT…..

  26. Avinash
    September 13th, 2011 at 1:35 am

    Sir,

    PLz send me d ckt diargram, all d details of d project, cost etc

  27. vivek
    September 13th, 2011 at 10:52 pm

    sir,
    kindly send me the required circuit diagram and pcb layout of DC MOTOR CONTROL USING IR DATA COMMUNICATION.
    Please send as early as possible.
    vivek suryavanshi

  28. olivyat
    September 20th, 2011 at 8:53 pm

    i need to program a microcontroller so as to control electric scissor type screw jack by infrared using the TV remote

  29. A.Sanjaya
    September 27th, 2011 at 3:39 pm

    Sir,

    Plz send me the ckt diagram of 8085 microcontroller burner

  30. nandkishor gupta
    October 4th, 2011 at 10:04 pm

    DC Motor Control using IR data communication send plz circuit diagram 9oct 2011 plz early send ckt diagram thanks

  31. amit
    January 8th, 2012 at 10:10 pm

    plz send me ckt diagram,….

  32. kranthi
    January 18th, 2012 at 10:33 pm

    i want the programs for all the projects which are being displayed here.

    can anyone help me. thanks in advance..

Leave a Reply

Question and Answer
C/C++ Unix & Linux Wordpress
Source codes
C C++ Java

Free email signup